Technik > Tech-Talk Amps

Issues with FX Loop

<< < (2/2)

odgeuk:

--- Zitat von: Dirk am 22.02.2018 15:15 ---Please provide a schematic, I won't trace pictures.
If unsure you can send the amp to us and our technic will check it.

Best regards, Dirk

--- Ende Zitat ---

Thanks Dirk

I'm not sure I'm able to provide a schematic. All I know is that the FX loop was populated with the components as per instructions, and wired as per instructions (between the Master Volume and Tone Stack). From a wiring perspective, it looks like the instructions have been followed correctly, so I am wondering if perhaps there is a problem with components on the board itself. Not sure how to test if this loop is wired correctly.

I think I shall have to return to my tech to have a look again, to see if there is something perhaps that has been missed in the wiring. Shipping from UK to Germany is not an option I'm afraid.

Any assistance or advice on basic troubleshooting of this loop would be appreciated.

odgeuk:

Dirk:

--- Zitat von: odgeuk am 22.02.2018 17:53 ---Not sure how to test if this loop is wired correctly.

--- Ende Zitat ---

But your tech should know and I hope he has a scope so he can test if both stages are working correctly or not. If they work correct than the components on the board are ok otherwise not.

Shipping from UK to Germany is not a big issue (yet). You just should make sure that you pack the amp well.

Best regards, Dirk

Navigation

[0] Themen-Index

[*] Vorherige Sete