Technik > Tech-Talk Amps

Help kit ac18

<< < (3/4) > >>

Jazzavri:
hi after receiving condos and spare resistors (preventive) I repaired my faults and the amp works wonderfully !! after a good preheating and 45 min of play no parasitic noise the amp is very quiet. I will post pictures of the finished head. Thank you and see you soon :guitar:

Laurent:
 :topjob:

Jazzavri:
small technical question on the ac18. would it be possible to adapt a 4-switch pedal instead of the tone switch? it will allow to have as an amp has several channels at the foot. the only problem is that with each change of channels, the previous contact opens? I do not see how to schematize the whole? the ac18 is a rather plug and play amp and plays very well at the volume of the guitar but it could be a little more. ??? ???

Laurent:
Hi,

Almost everything is possible. In this case you would have to integrate relays to switch the different caps. This would allow to keep the tone switch and also to use a Footswitch.
Whether the complexity in the realisation matches to the need or not, is up to you.

Cheers
Laurent

Jazzavri:
thank you laurent. I understand the principle of the relay. should be integrated an external 9 v power supply to the pedal with 4 relays and by switch and pulse switches?

Navigation

[0] Themen-Index

[#] Nächste Seite

[*] Vorherige Sete