Impressum | Datenschutz | Shop | DIY | TT @ Twitter | TT-Cabs
Anzeigen der neuesten Beiträge

Tube-Reverb schematic, V1-1

  • 2 Antworten
  • 757 Aufrufe

0 Mitglieder und 1 Gast betrachten dieses Thema.

*

Offline warteko

  • Newbie
  • *
  • 3
Tube-Reverb schematic, V1-1
« am: 31.03.2022 12:12 »
Hallo,
Looking at the schematic of the Tube-Reverb project, I notice that on the schematic nothing is connected to the control grid (pin 2) of V1-1. But  looking at the layout diagram, this pin is connected to R7. But strangely on this layout R6 &R7 are shown with 4 grey bands instead of a valid color coding (being 2.2 M-ohms should be red-red-green, and maybe gold for the precision class.
Am I right to think that there is a link missing between R6/R7/C3 common junction and pin 2 of V2 ? Kind of cathode follower ?

MFG
Chris

*

Offline stephan61

  • YaBB God
  • *****
  • 839
Re: Tube-Reverb schematic, V1-1
« Antwort #1 am: 31.03.2022 14:45 »
Hi Chris,
yes, you are right. There is a bug in the schematic, the junction R6/R7/C3 should be connected to the grid of R1/1.
Also, you may refer to the original schematic of the Fender Reverb Unit. There it is shown in the correct way.

Regards Stephan
"It must schwing!"

*

Offline Dirk

  • Dirk M.
  • Administrator
  • YaBB God
  • *****
  • 12.925
  • 2T or not 2T
Re: Tube-Reverb schematic, V1-1
« Antwort #2 am: 31.03.2022 20:10 »
Hi,
fixed.

Best regards, Dirk
Für Support und Produktanfragen bitte das offizielle Kontaktformular im Shop verwenden. PMs werden nicht beantwortet.