Tube-Town Forum
Technik => Tech-Talk Materialien => Thema gestartet von: Gtr0 am 21.01.2018 10:03
-
Hi Folks.
I seriously need a custom made chassis as I am designing a multi-channel high gain amplifier. My lack for foreign languages doesn't help, for sure (american living in belgium). The big problem I need to overcome is the chassis height... I need something closer to 8.5cm rather than the usual 6.5cm.
Does ANYONE have a clue where I can have a "prototype" chassis made with the possibility of more in the future?
Any help is appreciated!!!
Gtr0
-
Hi,
I'd suggest to go to a local locksmith who can bend sheet metal. It shouldn't be a problem to get a chassis this way in exactly the dimensions you need it
Cheers
LöD
-
Hi,
I'd suggest to go to a local locksmith who can bend sheet metal. It shouldn't be a problem to get a chassis this way in exactly the dimensions you need it
Cheers
LöD
Thank you. I will check it out right away.
Best Regards,
Gtr0
-
Hi,
local locksmith are an option but mostly they can/will only produce raw chassis at reasonable costs and you need to punch/drill the holes by your own.
You could also try companies that laser cut and bend chassis. This is usually quite expensive for prototypes, but as soon as you order a series it may get much cheaper per unit. The problem is to deliver the necessary 3-D dataset (CAD) that they can use for their processing (compatible to their software) otherwise these are probably additional costs. I once asked one of these laser companies and they gave me a quote of more than 200€, far to much for a single chassis for my hobby, but may be ok for (semi-) professionals when they order series of chassis on a reduced fee.
Good luck. I think there are many people here that appreciate your feedback for their own projects.
Cheers
Gerhard