Tube-Town Forum
Technik => Tech-Talk Amps => Thema gestartet von: warioblast am 1.04.2020 19:37
-
Hey guys,
How can I mod TT dual relay board https://www.tube-town.net/ttstore/kit-double-relais-switcher-6-v.html (https://www.tube-town.net/ttstore/kit-double-relais-switcher-6-v.html) to work with a mono footswitch pedal.
Cheers
-
I noticed a pin of the cliff jack is connected to ground. I'm thinking this shoud do it.
-
It works already with a mono plug.
Best regards, Dirk
-
Hello Dirk & thank you for the support.
I would like to switch the 4 switches of the 2 relays at once with my mono Marshall footswitch.
-
Hi,
yes, this works. You did not test ?
Dirk
-
With my Marshall footswitch; mono; it only switches the Relay 2. The Relay 1 is on all the time.
-
I'm thinking I should cut the trace that goes from the ring (?) to the - pin of the relay 1.
And from the - pin of the relay 1, going to one of the tip pin. It should be 50-50, right !?
-
I'm thinking I should cut the trace that goes from the ring (?) to the - pin of the relay 1.
And from the - pin of the relay 1, going to one of the tip pin. It should be 50-50, right !?
-
;D